Lying on your back on cold concrete while tinkering away underneath your vehicle can get old pretty fast. As does searching for a bucket to flip upside down to sit on when working in your garage or shop.
For the hobbyist, those that do vehicle maintenance themselves, or a professional, a good creeper is an investment that will keep you comfortable, save your back, and save you time which in turn could save you money.
Having agarage creeperis the best solution to such dilemma, which is ideal not only for the professional mechanics, but also for the do-it-yourself enthusiasts. Essentially, this equipment is a combination of padded tray and wheels that allow people to move around, somewhat like hovering above the ground.
- This body-fitting design was developed through testing on many body...
- Creeper body is 2 inch longer for a better fit
- Urethane rollers are inserted into steel bushings which are molded...
The first product on the list is the Lisle creeperLI93102, which comes in a yellow plastic body. Garnering an average rating of 4.9-Stars, it boasts a body-fitting design, which has been engineered through testing on different body, types, hence, providing optimum comfort with a reduced user fatigue.
Thismechanics creeperhas a 2-inch longer body than most creepers around; thereby, offering a better fit. With the steel bushings are urethane rollers, both molded into the body and provide extra strength, plus easy roller replacement at the same time. It is a low-profile creeper with a 7/8-inch floor clearance.
- Rugged ergonomic plastic design for comfort
- Six durable 3in. rotating ball bearing casters provide smooth, easy...
- Resistant to oil, grease and dirt, making clean-up fast and easy
- Low profile 1-1/4" ground clearance
- Weight capacity : 280 lbs.
When your car has a very low clearance, it’s hard to find a creeper that allows you to get down that low. One such exception is the Torin TRP6240, a 40-inch plastic creeper with a remarkable ground clearance of 1 ¼ inch.
The rollers rugged ergonomic allows it to be mobile even in tight spots without sacrificing comfort. This 40in. Rugged Torin Plastic Creeper is designed for total convenience with a built-in handle and two side storage trays for easy access to small parts and tools. It has a vinyl covered foam headrest for added comfort.
The creeper weighs only 7.5 pounds and has six compact 3-inch ball bearing casters that refine its movement. According to its manufacturer, it has a maximum weight capacity of 280 pounds. The plastic material is also resistant to dirt, oil, and grease which make cleaning fast and easy.
- Transforms with no tools in seconds
- 40" Steel frame construction, Seat Size: 14" x 12-1/4"
- Padded seat and headrest
- 450 lbs. rated capacity
- Six 3" polyurethane, oil resistant, full bearing casters for easy...
On the other hand, the Omega 91000 receives an average customer rating of 4.5-Stars. Thisautomotive creepercomes in an elegant black color with a 40-inch steel frame construction. The Z Creeper from Omega is a foldable variant, allowing a tool-free transformation in just seconds.
The size seat measures at 14-inch x 12-1/4-inch with a padded seat, plus a headrest. Besides its 450-pound rated capacity, the Z Creeper also features six 3-inch polyurethane, full bearing casters, which are oil-resistant; thereby, providing easy movement and ultimate comfort at the same time.
Considered as a 2-in-1 tool, thisconvertible creeperhas a ‘Z’ shape design when folded, which allows for a mechanics seat, while serves as a creeper once unfolded. The thick padded bed gives every user the maximum comfort during operations, considering the hassles when working underneath vehicles.
The classic design also comes with a one full-year warranty, providing buyers with a full-year support in case of product defects. Nonetheless, the Z Creeper is one-of-a-kind, providing users with the most comfortable auto repair experience possible, whether working on exterior detailing or brakes, this stool comes incredibly handy.
- Transforms with no tools in seconds
- 40" Steel frame construction, Seat Size: 14" x 12-1/4"
- Padded seat and headers
- 450 pounds rated capacity
- Six 3" polyurethane, oil resistant, full bearing casters for easy...
This snazzy looking black creeper has good quality casters and can be folded into a comfortable Z-shaped backless seat, so no more searching for a bucket to flip over and sit on.
This means it is suitable to use on any number of tasks around the house such as electrical work or painting and not just on vehicles in the garage. It weighs 25.5 lbs and its sturdy steel construction suits those of us with a sturdy composition, providing great body support up to a weight of 450 lbs.
There is a very smooth roll on 6 swivel casters and while the headrest is comfortable it is not adjustable so it remains flat.
- Low profile design
- Wide contoured deck for comfort
- Drop deck has no pinch points
- Huge 5 inches casters
- 401 pounds weight capacity
This offering from Traxion stands out immediately due to its large 5-inch casters which makes it roll very smoothly anywhere including on uneven surfaces or over electrical cables, even if you are a little on the heavy side.
It has a capacity of up to 400 lbs and provides great back support and is wide enough to suit almost all body shapes and sizes. The headrest doesn’t elevate, it lies flat, but the unit is nicely finished with a scratch resistant surface.
And with low profile design, it is by far the best automotive creeper and works perfectly on low cars or sports cars.
- 100% American!
- Huge 5" wheels go where other creepers can't!
- Lowest creeper on the market! Will not tip you over!
- 300 lb capacity
- Best warranty in the creeper industry! (Limited lifetime on wheels,...
This creeper is unusual looking in comparison to its rivals as it was designed in 1974. It is made 100% in the USA and is quite large and therefore awkward to store.
The caster action is smooth and it doesn’t pinch you during use, and the wheels are guaranteed against manufacturer defects for life, which is unusual in this day and age. However, the headrest can be a little uncomfortable for some due to bolt heads being positioned where you might want to rest your head.
- This Product is manufactured in United States
- Low profile design that rest only 2-Inch from the ground
- Drop rail design allows greater shoulder and arm clearance
- Frame is constructed of 16 gauge, 3/4-Inch square stock steel
- 1-Inch padding on the bed and 2-Inch padding on the headrest
The Williams 42301 Creeper is a heavy duty creeper that’s made from a 16 gauge steel for added durability and heavy duty support.
Another great feature is that it actually comes equipped with a drop-rail design along the side of the creeper that allows for greater range of movement with the shoulders and arms and this makes it easier to work on the car without the arms bumping up on the side of the creeper or feeling trapped.
Covering the bed is one inch of padding and there’s two inches of padding on the headrest which is also slightly elevated for more comfort and better head position while working on the car.
It also comes equipped with 6 hooded casters that allow for a suitable range of movement on a flat surface and thanks to their hooded design it prevents dirt and grease from getting kicked up off the ground and onto clothing.
At both ends of the creeper the steel frame takes on somewhat of a handle-like design and this makes it a lot easier to manage it and move it around into a preferred positioning.
Mechanic stool & Creeper Seat: The best way to move around a vehicle
Seat creepers really save the knees and back when working on brakes, tires, and anything else at knee-height. Like the standard creepers above, they also come in all shapes and sizes.
|Traxion 2-700 ProGear Mobile Gear Seat|
|ATD Tools 81010 Hydraulic Creeper Seat||Sorta||No||Check Price|
|Torin Big Red Rolling||No||No||Check Price|
|Omega 92450 Black Tool Box Creeper||No||Yes||Check Price|
|Performance Tool W85025||No||Yes||Check Price|
- The large Gear Tray spins so you can easily access your tools and...
- Adjustable height to a very low profile made possible because of the...
- Huge 5" Casters made of Hard TPR Synthetic Rubber for a best in class...
- Race seat is comfortable even for long periods of time.Racing inspired...
- Carry handle built right in the seat to allow you to carry this seat...
- Casters are rated for 150 lbs. each.
- Steel and ball bearing construction for mobility.
- 360 degree rotating casters
- Large tool tray
- Steel construction
- Fully padded seat
- 3 Drawer Toolbox With Front And Back Tool Trays
- Four 3" polyurethane, oil resistant, full bearing casters for easy...
- 450 lb
- rated capacity
- Overall dimensions 18-1/4"L x 18-7/8"W x 14-1/8"H
- Reinforced seat supports up to 350 lbs.
- 3-drawer tool box with roller bearing slides
- Two folding tool trays with magnetic pads
- Vinyl padded seat cushion for maximum comfort and support
- 2-1/2 in. polyvinyl chloride full bearing casters for smooth movement
Truck / Top-side Creepers
Topside creepers, also called truck creepers, are a must for truck owners. They make it easy to get up into the engine compartment of any standard pick-up even those with lifts.
|Traxion 3-700 ProGear Topside Creeper|
|75 lbs||400 lbs||Check Price|
|Traxion 3-100 Foldable Topside Creeper||75 lbs||400 lbs||Check Price|
|ATD Tools 8116F Foldable Topside Creeper||69 lbs||400 lbs||Check Price|
If reading the phrase, “best mechanics creeper” makes you laugh or ask someone else what the heck this means, consider it as a sign that you need to buy one.
This is a useful tool for any household with a car. This makes checking underneath a vehicle easier and more comfortable.
Simply lie on the creeper and push with your legs to roll underneath a car. Some are padded, but all are sturdy and wide enough to accommodate an adult’s upper body weight.
What to look for in a mechanics creeper
Quality of roll: This depends on the type of wheels on the creeper. It should be durable and able to roll well over any kind of surfaces.
Steel wheels are usually on old-fashioned creepers. Steel disks are bolted to the creeper frame through a small axle. These are durable but easily get stuck little cracks and pebbles.
Urethane wheels with ball bearings are common in more modern creeper designs. These are durable and more functional. Rougher surfaces like large pebbles and asphalt are still issues.
Large wheels (4 to 5 inches in diameter) are used on top-of-the-line mechanics’ creepers. These roll smoothly, even over any possible obstructions or any rough surfaces.
Durability: Check the backing material. Cheap creepers have pressed cardboard backing that easily get damaged. Plywood backings are more solid but easily break. Hard plastic can hold up to more rigors.
Comfort: This is of personal preference. Some people prefer the plain flat board style, some like ones with a more ergonomic design and all the bells and whistles.
Types of materials in mechanics creepers
Pressed cardboard backing: These are thin and highly unreliable materials commonly used in cheap creepers. Exposure to humidity and water will easily damage this material.
Plywood: This a common material for mechanics creepers. The thickness also varies. Cheap models use only a thin sheet while some more expensive ones use reinforced backboards.
Recessed wheels: This brings the mechanics creeper closer to the floor/ground. This allows for more room to maneuver underneath the vehicle and handle parts and tools.
Wood vs.plastic: Think of how tough the work situation will be. Wood will absorb oils, fluids and coolants. Each spill will last a lifetime on wood.
Plastic is more resistant to these. However, some types of plastic will easily stain or may not hold up to the rigors of mechanics work.
You may still choose wood but with firm padding and fabric. These should be of heavy duty material and resistant to oil and various chemicals.
Advantages of using mechanics creepers
Easy to slide under a vehicle: Mechanics creepers make working on the under chassis of vehicles much easier. You do not have to crawl on your back to get underneath the vehicle.
Comfort: Features such as firm padding or raised headrests make long working for hours under a car a bit more bearable. These features reduce the need to frequently get up and stretch.
Keep the back off the ground: Imagine having to fix something underneath the car while on a rough road. A good creeper is surely a welcome thing.
Safety: Rolling in and out of a vehicle’s underside is safer when on a creeper, especially when fluids and oils are on the floor. This reduces contact with these fluids.
Ease of work: It is faster to work with a creeper. You simply slide out and grab tools then slide back under without having to get up and grab what you need.
Excellent back support: Even on a flat garage floor, the back can easily be strained and get cold while working. A good creeper can give back support while you work.
Types of mechanic creepers
Lightweight creepers: These are durable but do not weigh a ton. Materials are of wide range, from plywood, laminated wood, plastic or fiberglass.
These types are the best choice if you plan to carry a mechanics creeper around. These, however, may have limited durability because of compromise between lightweight and heavy-duty capability.
Convertible creepers: These cool mechanics creepers provide greater comfort. These have back panels combined with a stool. Some can be adjusted into a full chair.
Low creepers: These are the still the most popular, despite all other fancy features of other types of mechanics creepers. This is more functional and the choice of most mechanics.
The design places the panel very close to the floor. The wheels are recessed in order to reduce the height of the creeper from the floor.
These also have longer racks that will provide better support to the back. This is ideal for those who require more support when working under vehicles.
Will The Creeper Really Roll?
One of the main designs of a creeper is its rolling mechanism. Choosing a model with wheels is insufficient as you have to ensure that these wheels should actually roll with ease and comfort. Otherwise, another person will be necessary in dragging the user in and out of the car’s underneath, before and after a certain task.
Today, you can choose between three types of wheels that are used in the best-designed creepers. The previous models of creepers are usually composed of steel wheels with literally steel disks that are bolted onto the creeper’s frame through a small axle. These designs may seem durable, but could get stuck in little cracks or on pebbles.
The more updated designs have evolved into small urethane wheels combined with ball bearings. These wheel designs are similarly durable as the steel wheel, although they are more functional, while having some issues with rough surfaces such as larger pebbles or asphalt. Meanwhile, top-of-the-line designs now offer larger wheels like 4-inch to 5-inch in diameter that can easily roll over obstacles throughout garage floors.
Is It Durable?
The main issue with cheap creepers is their poor construction, only made of substandard materials. Typically, these models make use of a pressed cardboard backing, while others are constructed from ordinary plywood. Once left out in the rain, this type of creeper gets toasted, and certainly a waste of time and money.
Hence, going for a hard plastic material will be the best choice and thebest creepersyou will ever find. At times, there are half-inch plywood backs that can also hold up well over time. Nonetheless, the hard plastic or a vinyl sheet material ensures better durability and stability over extended periods.
Is It Going To Stain?
While this question seems to be subjective, you can still get a creeper model that can resist different kinds of stains. It is a given fact that this equipment is used in garages and automotive shops, wherein a lot of work, and messy works, are being performed. These repair and maintenance works usually deal with solvents, oil, grease, and other chemicals that might stain the creeper, especially when used underneath a vehicle.
Surely, this tool is going to take some wear as it rolls around and on the ground under a car. Choosing a model with the best material, such as a hard plastic should also be solvent-resistant, resisting any compound or substance that might stain the creeper. Therefore, thebest mechanics creeperis one made of hard plastic or a sturdy vinyl sheet that can resist such stains and etches, allowing for easy and fast cleaning after the work is done.
How To Make A Garage Creeper (ONLY $30!!)
This DIY mechanics creeper is a super useful project to have around your garage or workshop. Whether you’re modifying or servicing your car, this simple, quick project can be made for around $30 and is easily customisable to best suit your own needs. If you’re using scrap wood you can make it for even less!
Shop Creeper Safety Tips
When working on a car or other vehiclesafety should always be importantand especially so while working underneath one on a creeper.
Here are some safety tips to keep in mind the next time you’re working on your favorite car.
- While you’re underneath the vehicle make sure that there are additional safety stands in place just in case the jack falls or happens to tip over
- As always, make sure to wear eye protection while working on the vehicle
- Keep a tool tray nearby so that you always have quick access to any tools you need and avoid leaving them on your chest while you’re working
- Always make sure that your feet and legs are out of the way and can’t be run over by another car or truck while you’re underneath the vehicle
- When the creeper isn’t being used try to keep it in a reasonable position such as hung on the wall so that no one accidentally stepped on it and goes flying and so that children don’t play with it by mistake
It might not look like much, especially with its lack of padding, but the Lisle 93102 is the standout creeper we looked at.
It’s from a brand you can trust and any mechanic or hobbyist will appreciate the thought and attention to detail that went into the design process. Lisle have managed to deliver the most comfortable creeper of the bunch without resorting to padding. It has one purpose, and that is as a mechanics’ creeper, and it does that very, very well.
Should you want a dual-purpose model that functions as a creeper and a seat then the Pro-Lift C-9100 is our preferred choice but you should not rule out the unusually designed “Seat-with-Wheels” Torin Tr-6300 which can be used on all manner of tasks around the house and is restricted to just the garage or shop.